Two analogue endpoints
Connect two compatible analogue phones or fax devices to a SIP service.
Grandstream HT802 2-Port FXS Analogue Telephone Adapter
RRP $119.00
11% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $119.00
11% OFF
Grandstream • SKU HT802
The original two-port HT802 ATA with two FXS interfaces, two SIP profiles and a 10/100 Ethernet connection for compatible analogue endpoints.
The original Grandstream HT802 connects two compatible analogue phones or fax devices to SIP. It provides two FXS ports, two SIP profiles, one 10/100 Mbps Ethernet port, three-way calling per port, T.38 fax, TLS/SRTP and automated provisioning. This listing is the original HT802, not HT802V2, so the rear label and correct firmware branch must be checked.
Quick answer: Choose HT802 for a verified deployment of the original two-port ATA. Do not substitute HT802V2 without confirming hardware, firmware, provider and provisioning compatibility.
Connect two compatible analogue phones or fax devices to a SIP service.
Use two SIP profiles to support the planned port and service configuration.
Use T.38 fax, three-way calling and secure SIP options in a compatible environment.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Original HT802 not HT802V2 |
|---|---|
| FXS ports | 2 |
| SIP profiles | 2 |
| Network | 1 × 10/100 Mbps RJ45 |
| Fax | T.38 and G.711 pass-through |
| Power | 5V DC/1A supply requirement |
It provides two FXS ports for up to two compatible analogue endpoints.
The original HT802 supports two SIP profiles.
No. This listing is the original HT802. Confirm the rear label and use the correct firmware branch.
Yes. T.38 and G.711 fax pass-through are supported, subject to end-to-end compatibility.
No. The original HT802 provides one 10/100 Mbps Ethernet port.
Grandstream specifies a universal 5V DC/1A supply. Confirm the Australian regional item in delivered stock.
Yes. Grandstream lists three-way voice conferencing per port.
Yes. Provide the rear-label model, firmware, provider, analogue devices, sites and quantity.
Bring two compatible analogue endpoints into a SIP environment.
Configure the supported service design across both ports.
Support validated Fax-over-IP use.
Use supported three-way calling from either analogue port.
Use TLS and SRTP where the platform supports them.
Avoid V1/V2 firmware and replacement mistakes by checking the exact label.
Best for: small offices, legacy-device retention and replacement projects using the original two-port HT802 ATA.
| DigiPhone SKU | HT802 |
|---|---|
| Product type | Analogue telephone adapter |
| Generation | Original HT802; not HT802V2 |
| FXS ports | 2 |
| SIP profiles | 2 |
| Ethernet | 1 × 10/100 Mbps RJ45 |
| Fax | T.38 and G.711 pass-through |
| Conference | 3-way voice conference per port |
| Provisioning | TR-069 and XML; compatible UCM Zero Config |
| Security | TLS and SRTP |
| Power | 5V DC/1A universal supply requirement; confirm AU package |
| Lifecycle | Confirm original-model firmware and support status |
| Manufacturer warranty | Grandstream manufacturer warranty in Australia |
Compatibility note: Confirm original HT802 label, FXS requirement, SIP/PBX, analogue devices, fax, REN, power, firmware and lifecycle.
| SKU | HT802 |
| Barcode # | 6947273702047 |
| Brand | GRANDSTREAM |
| Shipping Weight | 1.0000kg |
This DigiPhone listing is supplied as an Australian version and is covered by Grandstream manufacturer warranty in Australia; duration and service conditions are subject to Grandstreams terms for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Grandstream • SKU HT802
The original two-port HT802 ATA with two FXS interfaces, two SIP profiles and a 10/100 Ethernet connection for compatible analogue endpoints.
The original Grandstream HT802 connects two compatible analogue phones or fax devices to SIP. It provides two FXS ports, two SIP profiles, one 10/100 Mbps Ethernet port, three-way calling per port, T.38 fax, TLS/SRTP and automated provisioning. This listing is the original HT802, not HT802V2, so the rear label and correct firmware branch must be checked.
Quick answer: Choose HT802 for a verified deployment of the original two-port ATA. Do not substitute HT802V2 without confirming hardware, firmware, provider and provisioning compatibility.
Connect two compatible analogue phones or fax devices to a SIP service.
Use two SIP profiles to support the planned port and service configuration.
Use T.38 fax, three-way calling and secure SIP options in a compatible environment.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Original HT802 not HT802V2 |
|---|---|
| FXS ports | 2 |
| SIP profiles | 2 |
| Network | 1 × 10/100 Mbps RJ45 |
| Fax | T.38 and G.711 pass-through |
| Power | 5V DC/1A supply requirement |
It provides two FXS ports for up to two compatible analogue endpoints.
The original HT802 supports two SIP profiles.
No. This listing is the original HT802. Confirm the rear label and use the correct firmware branch.
Yes. T.38 and G.711 fax pass-through are supported, subject to end-to-end compatibility.
No. The original HT802 provides one 10/100 Mbps Ethernet port.
Grandstream specifies a universal 5V DC/1A supply. Confirm the Australian regional item in delivered stock.
Yes. Grandstream lists three-way voice conferencing per port.
Yes. Provide the rear-label model, firmware, provider, analogue devices, sites and quantity.
This DigiPhone listing is supplied as an Australian version and is covered by Grandstream manufacturer warranty in Australia; duration and service conditions are subject to Grandstreams terms for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Bring two compatible analogue endpoints into a SIP environment.
Configure the supported service design across both ports.
Support validated Fax-over-IP use.
Use supported three-way calling from either analogue port.
Use TLS and SRTP where the platform supports them.
Avoid V1/V2 firmware and replacement mistakes by checking the exact label.
Best for: small offices, legacy-device retention and replacement projects using the original two-port HT802 ATA.
| DigiPhone SKU | HT802 |
|---|---|
| Product type | Analogue telephone adapter |
| Generation | Original HT802; not HT802V2 |
| FXS ports | 2 |
| SIP profiles | 2 |
| Ethernet | 1 × 10/100 Mbps RJ45 |
| Fax | T.38 and G.711 pass-through |
| Conference | 3-way voice conference per port |
| Provisioning | TR-069 and XML; compatible UCM Zero Config |
| Security | TLS and SRTP |
| Power | 5V DC/1A universal supply requirement; confirm AU package |
| Lifecycle | Confirm original-model firmware and support status |
| Manufacturer warranty | Grandstream manufacturer warranty in Australia |
Compatibility note: Confirm original HT802 label, FXS requirement, SIP/PBX, analogue devices, fax, REN, power, firmware and lifecycle.
| SKU | HT802 |
| Barcode # | 6947273702047 |
| Brand | GRANDSTREAM |
| Shipping Weight | 1.0000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
