Retain analogue devices
Connect compatible telephones, fax machines or paging equipment to an IP calling service instead of replacing them immediately.
Cisco ATA191-3PW-K9 2-Port Multiplatform Analog Telephone Adapter
RRP $483.14
56% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $483.14
56% OFF
Cisco • SKU ATA191-3PW-K9
A two-port Multiplatform analogue telephone adapter that connects compatible analogue phones, fax machines or paging devices to supported SIP and cloud calling services.
The ATA191-3PW-K9 is the Cisco ATA 191 Multiplatform variant. It converts two compatible analogue endpoints into SIP-connected IP devices and is designed for platforms including Cisco Webex Calling, BroadWorks/BroadCloud and supported third-party call control such as Asterisk or Metaswitch.
Quick answer: Choose ATA191-3PW-K9 for a supported Multiplatform SIP deployment, not a Cisco Unified Communications Manager enterprise deployment. Confirm service certification, provisioning and analogue-device requirements before ordering.
Connect compatible telephones, fax machines or paging equipment to an IP calling service instead of replacing them immediately.
Register and use two supported analogue endpoints, subject to the selected service and configuration.
Use the MPP edition with supported cloud calling and third-party SIP call-control systems.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact variant | ATA191-3PW-K9 Multiplatform |
|---|---|
| Analogue ports | 2 × RJ-11 FXS |
| Network | 1 × RJ-45 10/100BASE-T WAN |
| Platform | MPP for supported cloud and third-party SIP call control |
| Applications | Analogue phones, fax or paging devices |
| Power | 5 V DC adapter connection |
It identifies the Cisco ATA 191 Multiplatform, or MPP, two-port analogue telephone adapter.
The adapter provides two RJ-11 FXS ports. Each port can support a compatible analogue phone or fax session, subject to configuration.
No. This is the Multiplatform edition. Cisco documents the ATA191-K9 enterprise edition for Cisco call control such as CUCM and CME.
Cisco lists Webex Calling, BroadWorks/BroadCloud and supported third-party systems such as Asterisk and Metaswitch; confirm the service's current device policy.
Fax is supported through compatible methods, but reliability depends on the service, codec, network and fax equipment. Test the exact application.
No. The ATA 191 has one 10/100 WAN network port; the ATA 192 MPP model adds a separate LAN Ethernet port.
Yes. Contact DigiPhone with SKU ATA191-3PW-K9, provider, device types, site count and required port quantity.
Connect two compatible analogue endpoints and configure them for the intended service.
Designed for supported cloud calling and third-party SIP environments.
Continue using selected phones, fax machines or paging devices during an IP migration.
Deploy a small adapter where analogue ports are required at a branch or workstation.
Use supported fax pass-through or relay methods after end-to-end testing.
Provision the adapter through the methods supported by the selected service and firmware.
Best for: supported cloud-calling and third-party SIP deployments that need two analogue FXS ports.
| DigiPhone SKU | ATA191-3PW-K9 |
|---|---|
| Exact edition | Cisco ATA 191 Multiplatform / MPP |
| FXS ports | 2 × RJ-11, independently configurable |
| WAN | 1 × RJ-45 10/100BASE-T |
| LAN pass-through | Not provided on ATA 191 |
| Supported uses | Compatible analogue phones, fax and paging devices |
| Platform examples | Webex Calling, BroadWorks/BroadCloud and supported third-party SIP systems |
| Power input | 5 V DC |
| Licensing note | Cisco states no Cisco licence is required for connection to third-party call control |
| Manufacturer warranty | Cisco manufacturer warranty in Australia |
Compatibility note: Confirm MPP platform support, provider certification, provisioning, codecs, fax or paging behaviour, network QoS, power and emergency-calling requirements.
| SKU | ATA191-3PW-K9 |
| Barcode # | 889728031622 |
| Brand | CISCO |
| Shipping Weight | 0.5000kg |
| type | VOIP/IP PHONES,IP-PBX & VOIP GATEWAYS |
This DigiPhone listing is supplied as an Australian version and is covered by Cisco manufacturer warranty in Australia; duration and service conditions are subject to Ciscos terms for the exact Multiplatform model. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Cisco • SKU ATA191-3PW-K9
A two-port Multiplatform analogue telephone adapter that connects compatible analogue phones, fax machines or paging devices to supported SIP and cloud calling services.
The ATA191-3PW-K9 is the Cisco ATA 191 Multiplatform variant. It converts two compatible analogue endpoints into SIP-connected IP devices and is designed for platforms including Cisco Webex Calling, BroadWorks/BroadCloud and supported third-party call control such as Asterisk or Metaswitch.
Quick answer: Choose ATA191-3PW-K9 for a supported Multiplatform SIP deployment, not a Cisco Unified Communications Manager enterprise deployment. Confirm service certification, provisioning and analogue-device requirements before ordering.
Connect compatible telephones, fax machines or paging equipment to an IP calling service instead of replacing them immediately.
Register and use two supported analogue endpoints, subject to the selected service and configuration.
Use the MPP edition with supported cloud calling and third-party SIP call-control systems.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact variant | ATA191-3PW-K9 Multiplatform |
|---|---|
| Analogue ports | 2 × RJ-11 FXS |
| Network | 1 × RJ-45 10/100BASE-T WAN |
| Platform | MPP for supported cloud and third-party SIP call control |
| Applications | Analogue phones, fax or paging devices |
| Power | 5 V DC adapter connection |
It identifies the Cisco ATA 191 Multiplatform, or MPP, two-port analogue telephone adapter.
The adapter provides two RJ-11 FXS ports. Each port can support a compatible analogue phone or fax session, subject to configuration.
No. This is the Multiplatform edition. Cisco documents the ATA191-K9 enterprise edition for Cisco call control such as CUCM and CME.
Cisco lists Webex Calling, BroadWorks/BroadCloud and supported third-party systems such as Asterisk and Metaswitch; confirm the service's current device policy.
Fax is supported through compatible methods, but reliability depends on the service, codec, network and fax equipment. Test the exact application.
No. The ATA 191 has one 10/100 WAN network port; the ATA 192 MPP model adds a separate LAN Ethernet port.
Yes. Contact DigiPhone with SKU ATA191-3PW-K9, provider, device types, site count and required port quantity.
This DigiPhone listing is supplied as an Australian version and is covered by Cisco manufacturer warranty in Australia; duration and service conditions are subject to Ciscos terms for the exact Multiplatform model. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Connect two compatible analogue endpoints and configure them for the intended service.
Designed for supported cloud calling and third-party SIP environments.
Continue using selected phones, fax machines or paging devices during an IP migration.
Deploy a small adapter where analogue ports are required at a branch or workstation.
Use supported fax pass-through or relay methods after end-to-end testing.
Provision the adapter through the methods supported by the selected service and firmware.
Best for: supported cloud-calling and third-party SIP deployments that need two analogue FXS ports.
| DigiPhone SKU | ATA191-3PW-K9 |
|---|---|
| Exact edition | Cisco ATA 191 Multiplatform / MPP |
| FXS ports | 2 × RJ-11, independently configurable |
| WAN | 1 × RJ-45 10/100BASE-T |
| LAN pass-through | Not provided on ATA 191 |
| Supported uses | Compatible analogue phones, fax and paging devices |
| Platform examples | Webex Calling, BroadWorks/BroadCloud and supported third-party SIP systems |
| Power input | 5 V DC |
| Licensing note | Cisco states no Cisco licence is required for connection to third-party call control |
| Manufacturer warranty | Cisco manufacturer warranty in Australia |
Compatibility note: Confirm MPP platform support, provider certification, provisioning, codecs, fax or paging behaviour, network QoS, power and emergency-calling requirements.
| SKU | ATA191-3PW-K9 |
| Barcode # | 889728031622 |
| Brand | CISCO |
| Shipping Weight | 0.5000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
