Extend Cisco calling to analogue devices
Connect compatible analogue phones, fax machines or paging endpoints to a supported Cisco communications environment.
Cisco ATA191-K9 2-Port Analog Telephone Adapter for Cisco Call Control
RRP $671.88
30% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $671.88
30% OFF
Cisco • SKU ATA191-K9
A two-port enterprise analogue telephone adapter for connecting compatible analogue phones, fax machines or paging devices to supported Cisco call-control systems.
The ATA191-K9 is the Cisco call-control edition of the ATA 191, intended for supported Cisco Unified Communications Manager and Cisco Unified Communications Manager Express environments. It provides two independently configurable FXS ports and a 10/100 Ethernet network connection.
Quick answer: Choose ATA191-K9 only for a supported Cisco call-control deployment. It is not the ATA191-3PW-K9 Multiplatform edition, so verify CUCM or CME version, device licensing and provisioning before purchase.
Connect compatible analogue phones, fax machines or paging endpoints to a supported Cisco communications environment.
Configure two FXS ports with separate registrations or numbers according to the Cisco call-control design.
Supported HTTPS, TLS, SRTP, secure boot, AES and SSH capabilities help align with managed enterprise deployments.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact variant | ATA191-K9 for Cisco call control |
|---|---|
| Platform | Compatible CUCM and CME systems |
| Analogue ports | 2 × independently configurable FXS |
| Network | 1 × RJ-45 10/100 Ethernet |
| Codecs | G.711 and G.729 |
| Fax | T.38 and G.711 pass-through |
Cisco lists the enterprise ATA 191 for supported Cisco Unified Communications Manager and Cisco Unified Communications Manager Express systems.
No. ATA191-K9 is the Cisco call-control edition. The ATA191-3PW-K9 SKU identifies the Multiplatform edition.
The adapter has two independently configurable RJ-11 FXS ports for compatible analogue devices.
Cisco states that the ATA 191 requires one Essential User Connect Licence per port in CUCM. Confirm current licensing with the Cisco administrator or partner.
It supports T.38 and G.711 fax methods, but end-to-end reliability depends on configuration, network quality and the fax service.
The supplied information includes HTTPS, AES encryption, TLS, SRTP, secure boot and SSH support.
Yes. Contact DigiPhone with SKU ATA191-K9, call-control version, port count, analogue device types and site details.
Use the correct enterprise variant for compatible CUCM and CME designs.
Assign compatible analogue endpoints according to the Cisco call-control configuration.
Support common voice codecs and T.38 or G.711 fax workflows after testing.
Use supported encryption, secure boot and administration protocols in a managed network.
Integrate with modern IP addressing and QoS policies supported by the deployment.
Cisco PRT capabilities help administrators collect information for troubleshooting.
Best for: supported Cisco CUCM or CME environments that require two analogue voice, fax or paging ports.
| DigiPhone SKU | ATA191-K9 |
|---|---|
| Exact edition | Cisco ATA 191 for Cisco call control |
| Platform | Supported CUCM and CME environments |
| FXS ports | 2 × RJ-11, independently configurable |
| Ethernet | 1 × 10/100 RJ-45 network port |
| Voice codecs | G.711 and G.729 |
| Fax | T.38 relay and G.711 pass-through |
| Protocols / security | HTTPS, AES, TLS, SRTP, secure boot and SSH |
| Networking | IPv4, IPv6 and QoS support |
| Mounting | Desktop or supported wall mounting |
| Licensing | Confirm Cisco call-control licensing; CUCM UCL per port is documented |
| Manufacturer warranty | Cisco manufacturer warranty in Australia |
Compatibility note: Confirm Cisco call-control version, firmware, licensing per port, device-pack support, codecs, fax or paging behaviour, network QoS and power before ordering.
| SKU | ATA191-K9 |
| Barcode # | 889728028318 |
| Brand | CISCO |
| Shipping Weight | 0.4700kg |
| type | VOIP/IP PHONES,IP-PBX & VOIP GATEWAYS |
This DigiPhone listing is supplied as an Australian version and is covered by Cisco manufacturer warranty in Australia; duration and service conditions are subject to Ciscos terms for the exact enterprise call-control model. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Cisco • SKU ATA191-K9
A two-port enterprise analogue telephone adapter for connecting compatible analogue phones, fax machines or paging devices to supported Cisco call-control systems.
The ATA191-K9 is the Cisco call-control edition of the ATA 191, intended for supported Cisco Unified Communications Manager and Cisco Unified Communications Manager Express environments. It provides two independently configurable FXS ports and a 10/100 Ethernet network connection.
Quick answer: Choose ATA191-K9 only for a supported Cisco call-control deployment. It is not the ATA191-3PW-K9 Multiplatform edition, so verify CUCM or CME version, device licensing and provisioning before purchase.
Connect compatible analogue phones, fax machines or paging endpoints to a supported Cisco communications environment.
Configure two FXS ports with separate registrations or numbers according to the Cisco call-control design.
Supported HTTPS, TLS, SRTP, secure boot, AES and SSH capabilities help align with managed enterprise deployments.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact variant | ATA191-K9 for Cisco call control |
|---|---|
| Platform | Compatible CUCM and CME systems |
| Analogue ports | 2 × independently configurable FXS |
| Network | 1 × RJ-45 10/100 Ethernet |
| Codecs | G.711 and G.729 |
| Fax | T.38 and G.711 pass-through |
Cisco lists the enterprise ATA 191 for supported Cisco Unified Communications Manager and Cisco Unified Communications Manager Express systems.
No. ATA191-K9 is the Cisco call-control edition. The ATA191-3PW-K9 SKU identifies the Multiplatform edition.
The adapter has two independently configurable RJ-11 FXS ports for compatible analogue devices.
Cisco states that the ATA 191 requires one Essential User Connect Licence per port in CUCM. Confirm current licensing with the Cisco administrator or partner.
It supports T.38 and G.711 fax methods, but end-to-end reliability depends on configuration, network quality and the fax service.
The supplied information includes HTTPS, AES encryption, TLS, SRTP, secure boot and SSH support.
Yes. Contact DigiPhone with SKU ATA191-K9, call-control version, port count, analogue device types and site details.
This DigiPhone listing is supplied as an Australian version and is covered by Cisco manufacturer warranty in Australia; duration and service conditions are subject to Ciscos terms for the exact enterprise call-control model. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Use the correct enterprise variant for compatible CUCM and CME designs.
Assign compatible analogue endpoints according to the Cisco call-control configuration.
Support common voice codecs and T.38 or G.711 fax workflows after testing.
Use supported encryption, secure boot and administration protocols in a managed network.
Integrate with modern IP addressing and QoS policies supported by the deployment.
Cisco PRT capabilities help administrators collect information for troubleshooting.
Best for: supported Cisco CUCM or CME environments that require two analogue voice, fax or paging ports.
| DigiPhone SKU | ATA191-K9 |
|---|---|
| Exact edition | Cisco ATA 191 for Cisco call control |
| Platform | Supported CUCM and CME environments |
| FXS ports | 2 × RJ-11, independently configurable |
| Ethernet | 1 × 10/100 RJ-45 network port |
| Voice codecs | G.711 and G.729 |
| Fax | T.38 relay and G.711 pass-through |
| Protocols / security | HTTPS, AES, TLS, SRTP, secure boot and SSH |
| Networking | IPv4, IPv6 and QoS support |
| Mounting | Desktop or supported wall mounting |
| Licensing | Confirm Cisco call-control licensing; CUCM UCL per port is documented |
| Manufacturer warranty | Cisco manufacturer warranty in Australia |
Compatibility note: Confirm Cisco call-control version, firmware, licensing per port, device-pack support, codecs, fax or paging behaviour, network QoS and power before ordering.
| SKU | ATA191-K9 |
| Barcode # | 889728028318 |
| Brand | CISCO |
| Shipping Weight | 0.4700kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
