Ten-card project pack
Add a small batch of credentials for new users, visitors, spares or replacement cards.
Fanvil RFID Card Pack 10 Cards for Compatible Access-Control Devices
RRP $49.00
39% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $49.00
39% OFF
Fanvil • SKU RFID-PACK
A ten-card RFID credential pack for compatible Fanvil door phones and access-control devices after exact technology matching.
The supplied DigiPhone record identifies RFID-PACK as a pack of ten Fanvil RFID cards. It does not state credential frequency, card standard, memory, numbering or compatibility with a specific Fanvil device. Match the cards to the exact door phone, access controller and enrolment method before ordering or issuing them to users.
Quick answer: Choose RFID-PACK only when DigiPhone or Fanvil confirms that this exact ten-card pack matches the installed device and credential technology. It does not include a reader, door phone or access controller.
Add a small batch of credentials for new users, visitors, spares or replacement cards.
Use an exact supplier SKU to keep credential purchasing consistent across a validated estate.
Register, label, issue and revoke cards under the organisation's approved access-security process.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| DigiPhone SKU | RFID-PACK |
|---|---|
| Brand | Fanvil |
| Product type | RFID credential cards |
| Pack quantity | 10 cards |
| Reader / controller included | No |
| Credential technology | Not stated; confirm exact compatibility |
The supplied DigiPhone record states ten RFID cards.
The source does not list exact models. Confirm the installed reader or door phone before ordering.
The frequency is not stated in the supplied record and must not be assumed.
Pre-programming, numbering and memory details are not stated. Confirm the exact pack and enrolment process.
No. This listing is for a ten-card credential pack only.
That depends on the compatible access system. Administrators should revoke lost credentials through the approved management process.
The supplied record states manufacturer warranty, but no duration or credential-specific terms are provided.
Yes. Provide the Fanvil device models, credential technology, user quantity, spare allowance, sites and required packs.
Order credentials in a practical small project pack.
Add users or approved spares to a compatible Fanvil system.
Support documented enrolment and revocation procedures.
Keep validated spare cards for lost or damaged credentials.
Avoid incompatible frequencies or standards by verifying the reader first.
Plan larger quantities and spare ratios with DigiPhone project assistance.
Best for: validated Fanvil door-phone and access-control projects needing ten additional compatible RFID credentials.
| DigiPhone SKU | RFID-PACK |
|---|---|
| Product type | RFID credential card pack |
| Quantity | 10 cards |
| Brand | Fanvil |
| Credential frequency / standard | Not stated; confirm before ordering |
| Pre-encoding / numbering | Not stated |
| Compatible devices | Confirm exact Fanvil door phone or access controller |
| Included reader | No |
| Manufacturer warranty | Fanvil manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm exact reader or door-phone model, credential frequency and standard, enrolment, numbering, permissions, revocation and required card quantity.
| SKU | RFID-PACK |
| Brand | FANVIL |
| Shipping Weight | 0.0100kg |
This DigiPhone listing is supplied as an Australian version and is covered by Fanvil manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and must be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Fanvil • SKU RFID-PACK
A ten-card RFID credential pack for compatible Fanvil door phones and access-control devices after exact technology matching.
The supplied DigiPhone record identifies RFID-PACK as a pack of ten Fanvil RFID cards. It does not state credential frequency, card standard, memory, numbering or compatibility with a specific Fanvil device. Match the cards to the exact door phone, access controller and enrolment method before ordering or issuing them to users.
Quick answer: Choose RFID-PACK only when DigiPhone or Fanvil confirms that this exact ten-card pack matches the installed device and credential technology. It does not include a reader, door phone or access controller.
Add a small batch of credentials for new users, visitors, spares or replacement cards.
Use an exact supplier SKU to keep credential purchasing consistent across a validated estate.
Register, label, issue and revoke cards under the organisation's approved access-security process.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| DigiPhone SKU | RFID-PACK |
|---|---|
| Brand | Fanvil |
| Product type | RFID credential cards |
| Pack quantity | 10 cards |
| Reader / controller included | No |
| Credential technology | Not stated; confirm exact compatibility |
The supplied DigiPhone record states ten RFID cards.
The source does not list exact models. Confirm the installed reader or door phone before ordering.
The frequency is not stated in the supplied record and must not be assumed.
Pre-programming, numbering and memory details are not stated. Confirm the exact pack and enrolment process.
No. This listing is for a ten-card credential pack only.
That depends on the compatible access system. Administrators should revoke lost credentials through the approved management process.
The supplied record states manufacturer warranty, but no duration or credential-specific terms are provided.
Yes. Provide the Fanvil device models, credential technology, user quantity, spare allowance, sites and required packs.
This DigiPhone listing is supplied as an Australian version and is covered by Fanvil manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and must be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Order credentials in a practical small project pack.
Add users or approved spares to a compatible Fanvil system.
Support documented enrolment and revocation procedures.
Keep validated spare cards for lost or damaged credentials.
Avoid incompatible frequencies or standards by verifying the reader first.
Plan larger quantities and spare ratios with DigiPhone project assistance.
Best for: validated Fanvil door-phone and access-control projects needing ten additional compatible RFID credentials.
| DigiPhone SKU | RFID-PACK |
|---|---|
| Product type | RFID credential card pack |
| Quantity | 10 cards |
| Brand | Fanvil |
| Credential frequency / standard | Not stated; confirm before ordering |
| Pre-encoding / numbering | Not stated |
| Compatible devices | Confirm exact Fanvil door phone or access controller |
| Included reader | No |
| Manufacturer warranty | Fanvil manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm exact reader or door-phone model, credential frequency and standard, enrolment, numbering, permissions, revocation and required card quantity.
| SKU | RFID-PACK |
| Brand | FANVIL |
| Shipping Weight | 0.0100kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
