Dual-cell scalability
Start with one M500 and add a second compatible base for a larger coordinated DECT cell.
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
Snom • SKU SNOM-M500
A secure and scalable M500-series DECT base that can operate as a single cell or pair with a second M500 for wider dual-cell mobility.

The Snom M500 is the core of the M500 DECT system. One base supports up to 10 compatible devices and eight simultaneous narrowband calls; a dual-cell design can scale to 16 devices and up to 16 calls across two bases. It supports M55 and M56 handsets, M58 DECT desk phones, Shared Call Emulation, zero-touch provisioning, OTA handset updates and TLS/SRTP security.
Quick answer: Choose the M500 when the project needs an M500-series single- or dual-cell system. It is a base station, not a handset, and requires compatible M55, M56 or M58 endpoints plus a suitable PoE network.
Start with one M500 and add a second compatible base for a larger coordinated DECT cell.
Monitor, answer, hold and retrieve supported shared-line calls from compatible M500-series endpoints.
Use zero-touch provisioning, mutual TLS authentication and OTA endpoint updates for managed rollouts.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Snom M500 DECT base |
|---|---|
| Cell design | Single cell or dual cell with up to 2 M500 bases |
| Registered devices | Up to 10 single cell / 16 dual cell |
| Concurrent calls | Up to 8 single cell / 16 dual cell |
| Compatible endpoint family | Snom M55, M56 and M58; confirm firmware |
| Security | TLS, SRTP and mutual TLS provisioning |
| Power | PoE; adaptor not included |
No. It is the DECT base station for compatible M500-series handsets and desk phones.
Snom states that up to two M500 bases can be combined in a dual-cell system.
Snom lists M55 and M56 handsets plus the M58 DECT desk phone; verify the required firmware and regional variant.
Official Snom information lists up to 10 devices and eight calls on one base, or 16 devices and up to 16 calls across a two-base dual cell.
Compatibility should not be assumed. Confirm the exact Snom model, firmware, platform, network, power and accessory requirements before ordering.
This DigiPhone listing is presented as an Australian version with applicable Australian Consumer Law protections.
Yes. Contact DigiPhone with SKU SNOM-M500, the target platform, site and user quantities and required accessories for compatibility and project support.
Match capacity and coverage to the site design.
Connect compatible mobile handsets and M58 DECT desk phones.
Provide supported line-monitoring and call-sharing workflows.
Use mutual TLS authentication with zero-touch configuration.
Manage supported handset software over the air.
Power the base from compatible network infrastructure.
Best for: SMB, retail, warehouse and service environments deploying a managed Snom M500-series DECT system.
| DigiPhone SKU | SNOM-M500 |
|---|---|
| Product type | PoE DECT base station |
| Cell mode | Single cell or dual cell with up to 2 bases |
| Registered devices | Up to 10 single cell / 16 dual cell |
| Concurrent calls | Up to 8 single cell / 16 dual cell |
| Endpoints | Compatible Snom M55, M56 and M58 devices; verify firmware |
| Provisioning | Zero-touch with mutual TLS authentication |
| Updates | Over-the-air endpoint software updates |
| Security | TLS and SRTP |
| Power | PoE; external adaptor not included |
| Manufacturer warranty | Snom manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm the M500-series endpoint, PBX, firmware, Australian DECT region, single/dual-cell design and PoE requirements before ordering.
| SKU | SNOM-M500 |
| Barcode # | 4262377560150 |
| Brand | SNOM |
| Shipping Weight | 0.4800kg |
| type | SNOM IP PHONES |
This DigiPhone listing is supplied as an Australian version and is covered by the Snom manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Snom • SKU SNOM-M500
A secure and scalable M500-series DECT base that can operate as a single cell or pair with a second M500 for wider dual-cell mobility.

The Snom M500 is the core of the M500 DECT system. One base supports up to 10 compatible devices and eight simultaneous narrowband calls; a dual-cell design can scale to 16 devices and up to 16 calls across two bases. It supports M55 and M56 handsets, M58 DECT desk phones, Shared Call Emulation, zero-touch provisioning, OTA handset updates and TLS/SRTP security.
Quick answer: Choose the M500 when the project needs an M500-series single- or dual-cell system. It is a base station, not a handset, and requires compatible M55, M56 or M58 endpoints plus a suitable PoE network.
Start with one M500 and add a second compatible base for a larger coordinated DECT cell.
Monitor, answer, hold and retrieve supported shared-line calls from compatible M500-series endpoints.
Use zero-touch provisioning, mutual TLS authentication and OTA endpoint updates for managed rollouts.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Snom M500 DECT base |
|---|---|
| Cell design | Single cell or dual cell with up to 2 M500 bases |
| Registered devices | Up to 10 single cell / 16 dual cell |
| Concurrent calls | Up to 8 single cell / 16 dual cell |
| Compatible endpoint family | Snom M55, M56 and M58; confirm firmware |
| Security | TLS, SRTP and mutual TLS provisioning |
| Power | PoE; adaptor not included |
No. It is the DECT base station for compatible M500-series handsets and desk phones.
Snom states that up to two M500 bases can be combined in a dual-cell system.
Snom lists M55 and M56 handsets plus the M58 DECT desk phone; verify the required firmware and regional variant.
Official Snom information lists up to 10 devices and eight calls on one base, or 16 devices and up to 16 calls across a two-base dual cell.
Compatibility should not be assumed. Confirm the exact Snom model, firmware, platform, network, power and accessory requirements before ordering.
This DigiPhone listing is presented as an Australian version with applicable Australian Consumer Law protections.
Yes. Contact DigiPhone with SKU SNOM-M500, the target platform, site and user quantities and required accessories for compatibility and project support.
This DigiPhone listing is supplied as an Australian version and is covered by the Snom manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Match capacity and coverage to the site design.
Connect compatible mobile handsets and M58 DECT desk phones.
Provide supported line-monitoring and call-sharing workflows.
Use mutual TLS authentication with zero-touch configuration.
Manage supported handset software over the air.
Power the base from compatible network infrastructure.
Best for: SMB, retail, warehouse and service environments deploying a managed Snom M500-series DECT system.
| DigiPhone SKU | SNOM-M500 |
|---|---|
| Product type | PoE DECT base station |
| Cell mode | Single cell or dual cell with up to 2 bases |
| Registered devices | Up to 10 single cell / 16 dual cell |
| Concurrent calls | Up to 8 single cell / 16 dual cell |
| Endpoints | Compatible Snom M55, M56 and M58 devices; verify firmware |
| Provisioning | Zero-touch with mutual TLS authentication |
| Updates | Over-the-air endpoint software updates |
| Security | TLS and SRTP |
| Power | PoE; external adaptor not included |
| Manufacturer warranty | Snom manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm the M500-series endpoint, PBX, firmware, Australian DECT region, single/dual-cell design and PoE requirements before ordering.
| SKU | SNOM-M500 |
| Barcode # | 4262377560150 |
| Brand | SNOM |
| Shipping Weight | 0.4800kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.