Clearer room playback
Use dedicated stereo speakers to distribute remote voices and meeting audio across a compatible room.
Yealink MSpeaker II PoE Stereo Soundbar for Video Conferencing Systems
RRP $519.00
33% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $519.00
33% OFF
Yealink • SKU MSPEAKER-II
A PoE-enabled stereo conference soundbar with two built-in speakers, VCH connectivity and a 3.5 mm auxiliary input.
The Yealink MSpeaker II is a conference-room soundbar designed to extend playback for compatible Yealink video systems. Yealink lists stereo speakers, 100 Hz20 kHz frequency response, signal-to-noise ratio of at least 70 dB, 10W RMS and one VCH RJ45 port with IEEE 802.3af PoE. The supplied DigiPhone record also lists a 3.5 mm auxiliary input for compatible conferencing designs.
Quick answer: Choose MSpeaker II when a validated Yealink room system needs dedicated front-of-room playback. It is a speaker, not a microphone, camera, codec or standalone meeting-room system.
Use dedicated stereo speakers to distribute remote voices and meeting audio across a compatible room.
Carry supported audio, control and PoE through the approved Yealink VCH connection.
Use the supplied 3.5 mm AUX input within a professionally validated conferencing design.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Yealink MSpeaker II |
|---|---|
| Product type | Conference room stereo soundbar |
| Rated output | 10W RMS |
| Frequency response | 100 Hz20 kHz |
| Network/audio port | 1 × VCH RJ45 with 802.3af PoE |
| Auxiliary input | 3.5 mm AUX, as supplied |
It is a dedicated stereo soundbar for compatible Yealink video-conferencing room systems.
The supplied product information states two built-in speakers.
Yealink lists 10W RMS for MSpeaker II.
Yes. The VCH RJ45 port supports IEEE 802.3af PoE in a compatible Yealink room design.
Yes. The supplied DigiPhone information lists a 3.5 mm auxiliary input.
No microphone or camera is stated as included. It is a soundbar component.
Compatibility should not be assumed. Confirm the exact bundle, firmware, ports and topology before ordering.
Yes. Provide the room size, Yealink system, displays, microphone plan, mounting location and quantity.
Deliver clearer room playback than relying on small display speakers.
Integrate with an approved Yealink conferencing topology.
Simplify supported power and signal cabling through the VCH connection.
Provide dedicated output for compatible medium and larger room designs.
Support an approved 3.5 mm audio connection where the system design allows.
Validate acoustics, mounting and the complete Yealink component chain before rollout.
Best for: compatible Yealink boardrooms, training rooms and medium-to-large meeting spaces needing dedicated playback.
| DigiPhone SKU | MSPEAKER-II |
|---|---|
| Product type | Conference room stereo soundbar |
| Speakers | 2 built-in speakers, as supplied |
| Rated output | 10W RMS |
| Frequency response | 100 Hz20 kHz |
| Signal-to-noise ratio | At least 70 dB |
| VCH port | 1 × RJ45 |
| Power | IEEE 802.3af PoE through compatible VCH design |
| Auxiliary input | 3.5 mm AUX, as supplied |
| Compatibility | Confirm exact Yealink room system and firmware |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm Yealink room-system support, firmware, VCH topology, PoE source, cable length, mounting, audio routing and included accessories.
| SKU | MSPEAKER-II |
| Brand | YEALINK |
| Shipping Weight | 3.5000kg |
| type | VOIP/IP PHONES |
This DigiPhone listing is supplied as an Australian version and is covered by Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and must be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU MSPEAKER-II
A PoE-enabled stereo conference soundbar with two built-in speakers, VCH connectivity and a 3.5 mm auxiliary input.
The Yealink MSpeaker II is a conference-room soundbar designed to extend playback for compatible Yealink video systems. Yealink lists stereo speakers, 100 Hz20 kHz frequency response, signal-to-noise ratio of at least 70 dB, 10W RMS and one VCH RJ45 port with IEEE 802.3af PoE. The supplied DigiPhone record also lists a 3.5 mm auxiliary input for compatible conferencing designs.
Quick answer: Choose MSpeaker II when a validated Yealink room system needs dedicated front-of-room playback. It is a speaker, not a microphone, camera, codec or standalone meeting-room system.
Use dedicated stereo speakers to distribute remote voices and meeting audio across a compatible room.
Carry supported audio, control and PoE through the approved Yealink VCH connection.
Use the supplied 3.5 mm AUX input within a professionally validated conferencing design.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Yealink MSpeaker II |
|---|---|
| Product type | Conference room stereo soundbar |
| Rated output | 10W RMS |
| Frequency response | 100 Hz20 kHz |
| Network/audio port | 1 × VCH RJ45 with 802.3af PoE |
| Auxiliary input | 3.5 mm AUX, as supplied |
It is a dedicated stereo soundbar for compatible Yealink video-conferencing room systems.
The supplied product information states two built-in speakers.
Yealink lists 10W RMS for MSpeaker II.
Yes. The VCH RJ45 port supports IEEE 802.3af PoE in a compatible Yealink room design.
Yes. The supplied DigiPhone information lists a 3.5 mm auxiliary input.
No microphone or camera is stated as included. It is a soundbar component.
Compatibility should not be assumed. Confirm the exact bundle, firmware, ports and topology before ordering.
Yes. Provide the room size, Yealink system, displays, microphone plan, mounting location and quantity.
This DigiPhone listing is supplied as an Australian version and is covered by Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and must be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Deliver clearer room playback than relying on small display speakers.
Integrate with an approved Yealink conferencing topology.
Simplify supported power and signal cabling through the VCH connection.
Provide dedicated output for compatible medium and larger room designs.
Support an approved 3.5 mm audio connection where the system design allows.
Validate acoustics, mounting and the complete Yealink component chain before rollout.
Best for: compatible Yealink boardrooms, training rooms and medium-to-large meeting spaces needing dedicated playback.
| DigiPhone SKU | MSPEAKER-II |
|---|---|
| Product type | Conference room stereo soundbar |
| Speakers | 2 built-in speakers, as supplied |
| Rated output | 10W RMS |
| Frequency response | 100 Hz20 kHz |
| Signal-to-noise ratio | At least 70 dB |
| VCH port | 1 × RJ45 |
| Power | IEEE 802.3af PoE through compatible VCH design |
| Auxiliary input | 3.5 mm AUX, as supplied |
| Compatibility | Confirm exact Yealink room system and firmware |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm Yealink room-system support, firmware, VCH topology, PoE source, cable length, mounting, audio routing and included accessories.
| SKU | MSPEAKER-II |
| Brand | YEALINK |
| Shipping Weight | 3.5000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
