Fixed control-panel position
Mount the MTouch II at a consistent point for suitable room layouts.
Yealink MTouch II Wall Mount Bracket MTOUCH-II-WMB
RRP $60.00
53% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $60.00
53% OFF
Yealink • SKU MTOUCH-II-WMB
A dedicated mounting accessory for installing a compatible Yealink MTouch II touch control panel on a wall.
The Yealink MTOUCH-II-WMB is a wall mount bracket listed for the MTouch II touch control panel. It provides a project-specific alternative to tabletop placement where the room design requires a fixed wall position. The supplied record does not identify support for MTouch Plus, MTouch E2 or other control panels, so compatibility must be checked against the exact device.
Quick answer: Choose this bracket only for a verified Yealink MTouch II installation. It is a mounting accessory and does not include the MTouch II controller, room computer, camera or conferencing licence.
Mount the MTouch II at a consistent point for suitable room layouts.
Reduce tabletop clutter where wall access and cable routing have been designed.
Use the MTOUCH-II-WMB SKU to avoid mixing mounts for newer or different Yealink panels.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact SKU | MTOUCH-II-WMB |
|---|---|
| Brand | Yealink |
| Product type | Wall mount bracket |
| Primary compatibility | MTouch II touch control panel |
| Included system | Bracket only unless confirmed otherwise |
| Installation | Confirm wall, fasteners and cable path |
It is a Yealink wall mount bracket for the compatible MTouch II touch control panel.
No. This listing is for the mounting bracket, not the touch controller.
The supplied listing identifies MTouch II only. Do not use it for MTouch Plus unless Yealink confirms exact compatibility.
MTouch E2 compatibility is not stated. Select the mount specified for the exact controller.
The supplied record does not confirm package contents. Check the bracket kit and wall type before installation.
No. Wall strength, anchors, cable path, access and local installation requirements must be assessed.
The supplied DigiPhone record states manufacturer warranty, but no duration is provided.
Yes. Provide SKU MTOUCH-II-WMB, controller models, room count, wall type and required quantity.
Use the exact bracket intended for the identified controller.
Create a fixed user interface position in compatible meeting rooms.
Move the controller from the table where the room and cabling permit.
Integrate the panel location with the approved room-system cable route.
Standardise mounting across rooms using the same controller generation.
Avoid confusing MTouch II with MTouch Plus or MTouch E2 accessories.
Best for: meeting rooms using the exact Yealink MTouch II panel where a fixed wall-mounted controller is required.
| DigiPhone SKU | MTOUCH-II-WMB |
|---|---|
| Product type | Wall mount bracket |
| Primary device | Yealink MTouch II touch control panel |
| Other panel compatibility | Not confirmed; verify exact model |
| Included controller | No |
| Included room system | No |
| Package contents | Confirm bracket, fasteners and accessories before ordering |
| Installation | Wall structure, fixings, cable routing and accessibility must be checked |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm the controller is MTouch II, bracket package contents, wall structure, fixings, cable routing, accessibility and service clearance.
| SKU | MTOUCH-II-WMB |
| Brand | YEALINK |
| Shipping Weight | 3.5000kg |
This DigiPhone listing is supplied as an Australian version and is covered by Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and must be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU MTOUCH-II-WMB
A dedicated mounting accessory for installing a compatible Yealink MTouch II touch control panel on a wall.
The Yealink MTOUCH-II-WMB is a wall mount bracket listed for the MTouch II touch control panel. It provides a project-specific alternative to tabletop placement where the room design requires a fixed wall position. The supplied record does not identify support for MTouch Plus, MTouch E2 or other control panels, so compatibility must be checked against the exact device.
Quick answer: Choose this bracket only for a verified Yealink MTouch II installation. It is a mounting accessory and does not include the MTouch II controller, room computer, camera or conferencing licence.
Mount the MTouch II at a consistent point for suitable room layouts.
Reduce tabletop clutter where wall access and cable routing have been designed.
Use the MTOUCH-II-WMB SKU to avoid mixing mounts for newer or different Yealink panels.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact SKU | MTOUCH-II-WMB |
|---|---|
| Brand | Yealink |
| Product type | Wall mount bracket |
| Primary compatibility | MTouch II touch control panel |
| Included system | Bracket only unless confirmed otherwise |
| Installation | Confirm wall, fasteners and cable path |
It is a Yealink wall mount bracket for the compatible MTouch II touch control panel.
No. This listing is for the mounting bracket, not the touch controller.
The supplied listing identifies MTouch II only. Do not use it for MTouch Plus unless Yealink confirms exact compatibility.
MTouch E2 compatibility is not stated. Select the mount specified for the exact controller.
The supplied record does not confirm package contents. Check the bracket kit and wall type before installation.
No. Wall strength, anchors, cable path, access and local installation requirements must be assessed.
The supplied DigiPhone record states manufacturer warranty, but no duration is provided.
Yes. Provide SKU MTOUCH-II-WMB, controller models, room count, wall type and required quantity.
This DigiPhone listing is supplied as an Australian version and is covered by Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and must be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Use the exact bracket intended for the identified controller.
Create a fixed user interface position in compatible meeting rooms.
Move the controller from the table where the room and cabling permit.
Integrate the panel location with the approved room-system cable route.
Standardise mounting across rooms using the same controller generation.
Avoid confusing MTouch II with MTouch Plus or MTouch E2 accessories.
Best for: meeting rooms using the exact Yealink MTouch II panel where a fixed wall-mounted controller is required.
| DigiPhone SKU | MTOUCH-II-WMB |
|---|---|
| Product type | Wall mount bracket |
| Primary device | Yealink MTouch II touch control panel |
| Other panel compatibility | Not confirmed; verify exact model |
| Included controller | No |
| Included room system | No |
| Package contents | Confirm bracket, fasteners and accessories before ordering |
| Installation | Wall structure, fixings, cable routing and accessibility must be checked |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm the controller is MTouch II, bracket package contents, wall structure, fixings, cable routing, accessibility and service clearance.
| SKU | MTOUCH-II-WMB |
| Brand | YEALINK |
| Shipping Weight | 3.5000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
