Extend DECT reach
Add coverage beyond the base stations practical radio footprint in a compatible site design.
Poly Rove R8 DECT Repeater (ANZ) 2200-86840-012
RRP $957.00
90% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $957.00
90% OFF
Poly by HP • SKU 2200-86840-012
An ANZ-region DECT repeater for extending compatible Poly Rove coverage, with automatic handover, cascade support and DECT security features.
The Rove R8 extends the radio coverage of a compatible Poly Rove DECT deployment. The supplied exact-model details list up to two simultaneous calls per repeater, up to six repeaters per base station and up to three repeaters in cascade mode.
Quick answer: Choose the Rove R8 only as part of a compatible Poly Rove DECT design. A repeater extends coverage; it does not replace the DECT base station, handset or phone service.
Add coverage beyond the base stations practical radio footprint in a compatible site design.
Automatic handover supports movement between covered cells when the system is correctly planned.
Support for multiple repeaters and cascade mode helps address larger or more complex premises.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact variant | Rove R8 DECT Repeater, ANZ |
|---|---|
| Manufacturer SKU | 2200-86840-012 |
| DECT frequency | 18801900 MHz |
| Call capacity | Up to 2 simultaneous calls per repeater |
| Scale | Up to 6 repeaters per base; up to 3 in cascade |
| Security | DECT Security Step B |
It extends DECT radio coverage for a compatible Poly Rove system.
No. It is a repeater and requires a compatible Poly Rove base station and handsets.
The supplied product information states up to two simultaneous calls per repeater.
The supplied information states up to six repeaters per base station and up to three repeaters in cascade mode.
Yes. Automatic handover is supported when the compatible Rove system is correctly configured.
Yes. SKU 2200-86840-012 is the ANZ variant using the 18801900 MHz DECT band.
Yes. Contact DigiPhone with site plans, user and handset counts, existing Rove equipment and coverage concerns.
Extend a compatible Rove system into areas beyond the base stations direct reach.
Maintain supported calls while users move between correctly designed coverage cells.
Carry up to two simultaneous calls through each repeater.
Use up to six repeaters per base station in supported configurations.
Deploy up to three repeaters in a cascade where the site design requires it.
Uses the 18801900 MHz DECT band specified for this Australian and New Zealand model.
Best for: warehouses, schools, healthcare, retail and multi-zone sites extending an existing compatible Poly Rove DECT system.
| DigiPhone SKU | 2200-86840-012 |
|---|---|
| Product type | DECT repeater |
| Region | Australia / New Zealand |
| DECT frequency | 18801900 MHz |
| Slot support | 12 slots |
| Simultaneous calls | Up to 2 per repeater |
| Repeaters per base | Up to 6 |
| Cascade mode | Up to 3 repeaters |
| Handover | Automatic handover between cells |
| Synchronisation | Air synchronisation |
| Security | DECT Security Step B; encrypted daisy chain |
| Configuration | Automatic configuration on compatible single- and dual-cell systems |
| Manufacturer warranty | Poly manufacturer warranty in Australia |
Compatibility note: A site survey is recommended. Confirm Rove base, firmware, regional frequency and repeater topology before purchase.
| SKU | 2200-86840-012 |
| Brand | POLY |
| Shipping Weight | 1.0000kg |
| type | POLY IP PHONES |
This DigiPhone listing is supplied as an Australian version and is covered by Poly manufacturer warranty in Australia; duration and service conditions are subject to Polys terms for this repeater. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Poly by HP • SKU 2200-86840-012
An ANZ-region DECT repeater for extending compatible Poly Rove coverage, with automatic handover, cascade support and DECT security features.
The Rove R8 extends the radio coverage of a compatible Poly Rove DECT deployment. The supplied exact-model details list up to two simultaneous calls per repeater, up to six repeaters per base station and up to three repeaters in cascade mode.
Quick answer: Choose the Rove R8 only as part of a compatible Poly Rove DECT design. A repeater extends coverage; it does not replace the DECT base station, handset or phone service.
Add coverage beyond the base stations practical radio footprint in a compatible site design.
Automatic handover supports movement between covered cells when the system is correctly planned.
Support for multiple repeaters and cascade mode helps address larger or more complex premises.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact variant | Rove R8 DECT Repeater, ANZ |
|---|---|
| Manufacturer SKU | 2200-86840-012 |
| DECT frequency | 18801900 MHz |
| Call capacity | Up to 2 simultaneous calls per repeater |
| Scale | Up to 6 repeaters per base; up to 3 in cascade |
| Security | DECT Security Step B |
It extends DECT radio coverage for a compatible Poly Rove system.
No. It is a repeater and requires a compatible Poly Rove base station and handsets.
The supplied product information states up to two simultaneous calls per repeater.
The supplied information states up to six repeaters per base station and up to three repeaters in cascade mode.
Yes. Automatic handover is supported when the compatible Rove system is correctly configured.
Yes. SKU 2200-86840-012 is the ANZ variant using the 18801900 MHz DECT band.
Yes. Contact DigiPhone with site plans, user and handset counts, existing Rove equipment and coverage concerns.
This DigiPhone listing is supplied as an Australian version and is covered by Poly manufacturer warranty in Australia; duration and service conditions are subject to Polys terms for this repeater. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Extend a compatible Rove system into areas beyond the base stations direct reach.
Maintain supported calls while users move between correctly designed coverage cells.
Carry up to two simultaneous calls through each repeater.
Use up to six repeaters per base station in supported configurations.
Deploy up to three repeaters in a cascade where the site design requires it.
Uses the 18801900 MHz DECT band specified for this Australian and New Zealand model.
Best for: warehouses, schools, healthcare, retail and multi-zone sites extending an existing compatible Poly Rove DECT system.
| DigiPhone SKU | 2200-86840-012 |
|---|---|
| Product type | DECT repeater |
| Region | Australia / New Zealand |
| DECT frequency | 18801900 MHz |
| Slot support | 12 slots |
| Simultaneous calls | Up to 2 per repeater |
| Repeaters per base | Up to 6 |
| Cascade mode | Up to 3 repeaters |
| Handover | Automatic handover between cells |
| Synchronisation | Air synchronisation |
| Security | DECT Security Step B; encrypted daisy chain |
| Configuration | Automatic configuration on compatible single- and dual-cell systems |
| Manufacturer warranty | Poly manufacturer warranty in Australia |
Compatibility note: A site survey is recommended. Confirm Rove base, firmware, regional frequency and repeater topology before purchase.
| SKU | 2200-86840-012 |
| Brand | POLY |
| Shipping Weight | 1.0000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
