Defined 5V/1.2A output
Use the stated electrical rating for an accurate compatibility check.
Yealink 5V 1.2A Australian Power Adapter for Selected IP Phones
RRP $14.00
0% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $14.00
0% OFF
Yealink • SKU SIPPWR5V1.2A-AU
A 5V/1.2A Australian power pack listed for selected Yealink T20, T22, T26, T27, T28, T41 and T42-series IP phones.
The supplied record lists SIPPWR5V1.2A-AU for selected phones across the Yealink T20, T22, T26, T27, T28, T41 and T42 families, including stated T22P, T26P, T27P, T28P, T41P and T42G examples. Because the listing name also mentions T41S and T42S, confirm the exact model rather than relying on the broad family list.
Quick answer: Choose this adapter only when the exact phone documentation confirms 5V/1.2A and SIPPWR5V1.2A-AU. Do not assume every T4-series or similarly named Yealink phone is compatible.
Use the stated electrical rating for an accurate compatibility check.
Supports selected installed Yealink models after exact verification.
Designed as a regional power pack for approved deployments.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| DigiPhone SKU | SIPPWR5V1.2A-AU |
|---|---|
| Output | 5V DC, 1.2A |
| Supplied family list | Selected T20, T22, T26, T27, T28, T41 and T42 phones |
| Named examples | T22P, T26P, T27P, T28P, T41P, T42G; listing name also states T41S and T42S |
| Region | Australia |
| Important | Exact model and connector must be confirmed |
The supplied record states 5V DC at 1.2A.
Selected T20, T22, T26, T27, T28, T41 and T42 models are referenced, with several exact suffixes in the supplied record.
The supplied listing name and description mention different T41 and T42 variants, and electrical compatibility cannot be inferred from a family name.
No duration was provided in the supplied DigiPhone record; confirm the manufacturer warranty terms for this exact accessory.
Yes. The supplied DigiPhone record identifies this as the Australian regional power option; confirm the exact plug and installation requirements before ordering.
No. Match the exact phone or handset model, voltage, current, connector and polarity. Similar-looking adapters are not automatically interchangeable.
Yes. Contact DigiPhone with SKU SIPPWR5V1.2A-AU, the exact Yealink device model and required quantity for compatibility and project support.
Match the stated electrical requirement to the target phone.
Listed for multiple legacy Yealink phone families, subject to exact model approval.
Regional power pack intended for local installation.
Restore local power to a verified compatible desk phone.
Support compatible installed fleets with approved spares.
Prevent mismatches across similarly named T41 and T42 variants.
Best for: verified replacement, local-power and spare requirements for selected Yealink phones specifically approved for 5V/1.2A.
| DigiPhone SKU | SIPPWR5V1.2A-AU |
|---|---|
| Product type | Australian external power pack |
| Output voltage | 5V DC |
| Output current | 1.2A |
| Supplied compatibility | Selected Yealink T20/T22/T26/T27/T28/T41/T42 models |
| Named examples | T22P, T26P, T27P, T28P, T41P, T42G; listing title also states T41S/T42S |
| Compatibility caution | Confirm exact model suffix, connector and polarity |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm the exact Yealink device model, voltage, current, connector, polarity and Australian mains-plug requirement before connection.
| SKU | SIPPWR5V1.2A-AU |
| Brand | YEALINK |
| Shipping Weight | 0.2000kg |
This DigiPhone listing is supplied as an Australian version and is covered by the Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU SIPPWR5V1.2A-AU
A 5V/1.2A Australian power pack listed for selected Yealink T20, T22, T26, T27, T28, T41 and T42-series IP phones.
The supplied record lists SIPPWR5V1.2A-AU for selected phones across the Yealink T20, T22, T26, T27, T28, T41 and T42 families, including stated T22P, T26P, T27P, T28P, T41P and T42G examples. Because the listing name also mentions T41S and T42S, confirm the exact model rather than relying on the broad family list.
Quick answer: Choose this adapter only when the exact phone documentation confirms 5V/1.2A and SIPPWR5V1.2A-AU. Do not assume every T4-series or similarly named Yealink phone is compatible.
Use the stated electrical rating for an accurate compatibility check.
Supports selected installed Yealink models after exact verification.
Designed as a regional power pack for approved deployments.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| DigiPhone SKU | SIPPWR5V1.2A-AU |
|---|---|
| Output | 5V DC, 1.2A |
| Supplied family list | Selected T20, T22, T26, T27, T28, T41 and T42 phones |
| Named examples | T22P, T26P, T27P, T28P, T41P, T42G; listing name also states T41S and T42S |
| Region | Australia |
| Important | Exact model and connector must be confirmed |
The supplied record states 5V DC at 1.2A.
Selected T20, T22, T26, T27, T28, T41 and T42 models are referenced, with several exact suffixes in the supplied record.
The supplied listing name and description mention different T41 and T42 variants, and electrical compatibility cannot be inferred from a family name.
No duration was provided in the supplied DigiPhone record; confirm the manufacturer warranty terms for this exact accessory.
Yes. The supplied DigiPhone record identifies this as the Australian regional power option; confirm the exact plug and installation requirements before ordering.
No. Match the exact phone or handset model, voltage, current, connector and polarity. Similar-looking adapters are not automatically interchangeable.
Yes. Contact DigiPhone with SKU SIPPWR5V1.2A-AU, the exact Yealink device model and required quantity for compatibility and project support.
This DigiPhone listing is supplied as an Australian version and is covered by the Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Match the stated electrical requirement to the target phone.
Listed for multiple legacy Yealink phone families, subject to exact model approval.
Regional power pack intended for local installation.
Restore local power to a verified compatible desk phone.
Support compatible installed fleets with approved spares.
Prevent mismatches across similarly named T41 and T42 variants.
Best for: verified replacement, local-power and spare requirements for selected Yealink phones specifically approved for 5V/1.2A.
| DigiPhone SKU | SIPPWR5V1.2A-AU |
|---|---|
| Product type | Australian external power pack |
| Output voltage | 5V DC |
| Output current | 1.2A |
| Supplied compatibility | Selected Yealink T20/T22/T26/T27/T28/T41/T42 models |
| Named examples | T22P, T26P, T27P, T28P, T41P, T42G; listing title also states T41S/T42S |
| Compatibility caution | Confirm exact model suffix, connector and polarity |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm the exact Yealink device model, voltage, current, connector, polarity and Australian mains-plug requirement before connection.
| SKU | SIPPWR5V1.2A-AU |
| Brand | YEALINK |
| Shipping Weight | 0.2000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
