Dual-band flexibility
Select 2.4GHz for reach or 5GHz for lower interference where the network design supports it.
Yealink WF50 Dual-Band Wi-Fi USB Dongle
RRP $54.81
9% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $54.81
9% OFF
Yealink • SKU WF50
A dual-band 2.4GHz and 5GHz USB Wi-Fi adapter for selected Yealink IP phones, with up to 433 Mbps rated 5GHz connectivity.
The Yealink WF50 gives supported IP phones a choice of 2.4GHz Wi-Fi at up to 150 Mbps or 5GHz at up to 433 Mbps. It supports IEEE 802.11a/b/g/n/ac and WPA/WPA2 security. Current official compatibility includes selected T4U and T5 phones on version 84 or later, while the supplied DigiPhone record also lists certain legacy phones. Always validate the exact host model and firmware rather than relying on a family name.
Quick answer: Choose WF50 when a verified compatible Yealink phone needs dual-band Wi-Fi. It is the better option than WF40 where approved 5GHz connectivity is required.
Select 2.4GHz for reach or 5GHz for lower interference where the network design supports it.
Use up to 433 Mbps on 5GHz with a compatible access point and host phone.
Connect through supported WPA or WPA2 business network configurations.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Yealink WF50 |
|---|---|
| Product type | Dual-band Wi-Fi USB dongle |
| 2.4GHz rate | Up to 150 Mbps |
| 5GHz rate | Up to 433 Mbps |
| Standards | IEEE 802.11a/b/g/n/ac |
| Security | WPA/WPA2 |
| Firmware | Version 84+ for current listed models |
WF50 supports both 2.4GHz and 5GHz Wi-Fi, while WF40 is a 2.4GHz-only adapter.
Yealink lists up to 150 Mbps on 2.4GHz and up to 433 Mbps on 5GHz.
The official product information lists WPA and WPA2 encryption support.
No. Confirm the exact model and minimum firmware before ordering.
Compatibility should not be assumed. Confirm the exact Yealink model, firmware, SIP platform, network, power and accessory requirements before ordering.
This DigiPhone listing is presented as an Australian version with the applicable manufacturer warranty in Australia and Australian Consumer Law protections.
Yes. Contact DigiPhone with SKU WF50, site and user quantities, target phone platform and required coverage for compatibility and project support.
Choose the approved wireless band for the site design.
Use the higher rated 5GHz transmission rate on compatible networks.
Connect supported phones to modern dual-band Wi-Fi.
Use supported encrypted wireless configurations.
Add Wi-Fi without a separate external client bridge.
Simplify deployment after host compatibility is confirmed.
Best for: compatible Yealink IP phones that need approved dual-band Wi-Fi connectivity at flexible business desks.
| DigiPhone SKU | WF50 |
|---|---|
| Product type | Dual-band Wi-Fi USB dongle |
| Frequency bands | 2.4GHz and 5GHz |
| Wireless standards | IEEE 802.11a/b/g/n/ac |
| 2.4GHz transmission | Up to 150 Mbps |
| 5GHz transmission | Up to 433 Mbps |
| Security | WPA/WPA2 |
| Current compatibility | Selected T42U/T43U/T44U/T46U/T48U/T52S/T54S/T53 phones, version 84+ |
| Legacy compatibility | Confirm supplied T27G/T41S/T42S/T46S/T48S variants and firmware |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm exact host model, firmware, USB support, 2.4/5GHz coverage, wireless security, SSID, QoS and phone power before ordering.
| SKU | WF50 |
| Barcode # | 6938818302174 |
| Brand | YEALINK |
| Shipping Weight | 0.4000kg |
This DigiPhone listing is supplied as an Australian version and is covered by the Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU WF50
A dual-band 2.4GHz and 5GHz USB Wi-Fi adapter for selected Yealink IP phones, with up to 433 Mbps rated 5GHz connectivity.
The Yealink WF50 gives supported IP phones a choice of 2.4GHz Wi-Fi at up to 150 Mbps or 5GHz at up to 433 Mbps. It supports IEEE 802.11a/b/g/n/ac and WPA/WPA2 security. Current official compatibility includes selected T4U and T5 phones on version 84 or later, while the supplied DigiPhone record also lists certain legacy phones. Always validate the exact host model and firmware rather than relying on a family name.
Quick answer: Choose WF50 when a verified compatible Yealink phone needs dual-band Wi-Fi. It is the better option than WF40 where approved 5GHz connectivity is required.
Select 2.4GHz for reach or 5GHz for lower interference where the network design supports it.
Use up to 433 Mbps on 5GHz with a compatible access point and host phone.
Connect through supported WPA or WPA2 business network configurations.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Yealink WF50 |
|---|---|
| Product type | Dual-band Wi-Fi USB dongle |
| 2.4GHz rate | Up to 150 Mbps |
| 5GHz rate | Up to 433 Mbps |
| Standards | IEEE 802.11a/b/g/n/ac |
| Security | WPA/WPA2 |
| Firmware | Version 84+ for current listed models |
WF50 supports both 2.4GHz and 5GHz Wi-Fi, while WF40 is a 2.4GHz-only adapter.
Yealink lists up to 150 Mbps on 2.4GHz and up to 433 Mbps on 5GHz.
The official product information lists WPA and WPA2 encryption support.
No. Confirm the exact model and minimum firmware before ordering.
Compatibility should not be assumed. Confirm the exact Yealink model, firmware, SIP platform, network, power and accessory requirements before ordering.
This DigiPhone listing is presented as an Australian version with the applicable manufacturer warranty in Australia and Australian Consumer Law protections.
Yes. Contact DigiPhone with SKU WF50, site and user quantities, target phone platform and required coverage for compatibility and project support.
This DigiPhone listing is supplied as an Australian version and is covered by the Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Choose the approved wireless band for the site design.
Use the higher rated 5GHz transmission rate on compatible networks.
Connect supported phones to modern dual-band Wi-Fi.
Use supported encrypted wireless configurations.
Add Wi-Fi without a separate external client bridge.
Simplify deployment after host compatibility is confirmed.
Best for: compatible Yealink IP phones that need approved dual-band Wi-Fi connectivity at flexible business desks.
| DigiPhone SKU | WF50 |
|---|---|
| Product type | Dual-band Wi-Fi USB dongle |
| Frequency bands | 2.4GHz and 5GHz |
| Wireless standards | IEEE 802.11a/b/g/n/ac |
| 2.4GHz transmission | Up to 150 Mbps |
| 5GHz transmission | Up to 433 Mbps |
| Security | WPA/WPA2 |
| Current compatibility | Selected T42U/T43U/T44U/T46U/T48U/T52S/T54S/T53 phones, version 84+ |
| Legacy compatibility | Confirm supplied T27G/T41S/T42S/T46S/T48S variants and firmware |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm exact host model, firmware, USB support, 2.4/5GHz coverage, wireless security, SSID, QoS and phone power before ordering.
| SKU | WF50 |
| Barcode # | 6938818302174 |
| Brand | YEALINK |
| Shipping Weight | 0.4000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
