Add PoE without replacing the switch
Insert the adapter between a non-PoE network port and a compatible PoE endpoint.
Yealink YLPOE30 Gigabit IEEE 802.3af/at PoE Adapter
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
Yealink • SKU YLPOE30
A plug-and-play Gigabit PoE injector for compatible Yealink conference phones and other PoE endpoints, delivering data and power over one Ethernet cable.
The Yealink YLPOE30 is a mid-span PoE adapter for adding power to an Ethernet connection when a compatible endpoint is not connected to a PoE switch. It is designed for Yealink CP960, CP965 and other supported Yealink PoE phones, and complies with IEEE 802.3af and 802.3at. The adapter provides 10/100/1000 Mbps data pass-through, 54V 0.56A output and separate power and PoE status indicators. Compatibility must be confirmed against the exact powered device.
Quick answer: Choose YLPOE30 when a compatible Yealink PoE device needs power but the network switch or outlet does not supply PoE. It is not a substitute for a model-specific DC adaptor.
Insert the adapter between a non-PoE network port and a compatible PoE endpoint.
Deliver supported data and electrical power through the Ethernet cable to the phone.
Maintain 10/100/1000 Mbps connectivity for compatible devices and networks.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Yealink YLPOE30 |
|---|---|
| Product type | Gigabit PoE adapter / injector |
| PoE standards | IEEE 802.3af and 802.3at |
| Ethernet | 10/100/1000 Mbps |
| AC input | 100240V AC, 50/60Hz, 1.0A |
| DC output | 54V, 0.56A |
| Indicators | PWR and PoE LEDs |
It adds IEEE 802.3af/at power to a compatible Ethernet connection so data and power can travel to a supported PoE device over one cable.
Yes. Yealink lists 10/100/1000 Mbps PoE ports.
Yealink lists CP960, CP965 and other Yealink IP phones that support PoE; exact compatibility must be confirmed.
The official specification lists 54V DC at 0.56A output from a 100240V AC input.
Compatibility should not be assumed. Confirm the exact Yealink model, firmware, phone or meeting platform, network, power and accessory requirements before ordering.
This DigiPhone listing is presented as an Australian version with the applicable manufacturer warranty in Australia and Australian Consumer Law protections.
Yes. Contact DigiPhone with SKU YLPOE30, site and user quantities, target platform and required accessories for compatibility, bulk pricing and project support.
Power compatible standard PoE and PoE+ endpoints.
Pass 10/100/1000 Mbps data to a compatible powered device.
Keep power and data together between the injector and phone.
Use the adapter without software configuration on a compatible connection.
Check power and PoE state from dedicated LEDs.
Use the 100240V input with the correct Australian power cord and installation.
Best for: compatible Yealink conference phones and PoE IP phones connected to network ports that do not already provide PoE.
| DigiPhone SKU | YLPOE30 |
|---|---|
| Product type | PoE adapter / injector |
| PoE standards | IEEE 802.3af and IEEE 802.3at |
| Interface | 10/100/1000 Mbps PoE ports |
| LED indicators | PWR and PoE |
| Input | 100240V AC, 50/60Hz, 1.0A |
| Output | 54V DC, 0.56A |
| Pin definition | 1/2 positive; 3/6 negative |
| Operating temperature | 0°C to 40°C |
| Operating humidity | 10% to 90%, non-condensing |
| Compatibility | Yealink CP960, CP965 and other supported PoE-featured Yealink IP phones |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm exact Yealink endpoint, IEEE 802.3af/at requirement, Gigabit cabling, Australian power cord, electrical location and package contents.
| SKU | YLPOE30 |
| Barcode # | 6938818302006 |
| Brand | YEALINK |
| Shipping Weight | 1.0000kg |
This DigiPhone listing is supplied as an Australian version and is covered by the Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU YLPOE30
A plug-and-play Gigabit PoE injector for compatible Yealink conference phones and other PoE endpoints, delivering data and power over one Ethernet cable.
The Yealink YLPOE30 is a mid-span PoE adapter for adding power to an Ethernet connection when a compatible endpoint is not connected to a PoE switch. It is designed for Yealink CP960, CP965 and other supported Yealink PoE phones, and complies with IEEE 802.3af and 802.3at. The adapter provides 10/100/1000 Mbps data pass-through, 54V 0.56A output and separate power and PoE status indicators. Compatibility must be confirmed against the exact powered device.
Quick answer: Choose YLPOE30 when a compatible Yealink PoE device needs power but the network switch or outlet does not supply PoE. It is not a substitute for a model-specific DC adaptor.
Insert the adapter between a non-PoE network port and a compatible PoE endpoint.
Deliver supported data and electrical power through the Ethernet cable to the phone.
Maintain 10/100/1000 Mbps connectivity for compatible devices and networks.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Yealink YLPOE30 |
|---|---|
| Product type | Gigabit PoE adapter / injector |
| PoE standards | IEEE 802.3af and 802.3at |
| Ethernet | 10/100/1000 Mbps |
| AC input | 100240V AC, 50/60Hz, 1.0A |
| DC output | 54V, 0.56A |
| Indicators | PWR and PoE LEDs |
It adds IEEE 802.3af/at power to a compatible Ethernet connection so data and power can travel to a supported PoE device over one cable.
Yes. Yealink lists 10/100/1000 Mbps PoE ports.
Yealink lists CP960, CP965 and other Yealink IP phones that support PoE; exact compatibility must be confirmed.
The official specification lists 54V DC at 0.56A output from a 100240V AC input.
Compatibility should not be assumed. Confirm the exact Yealink model, firmware, phone or meeting platform, network, power and accessory requirements before ordering.
This DigiPhone listing is presented as an Australian version with the applicable manufacturer warranty in Australia and Australian Consumer Law protections.
Yes. Contact DigiPhone with SKU YLPOE30, site and user quantities, target platform and required accessories for compatibility, bulk pricing and project support.
This DigiPhone listing is supplied as an Australian version and is covered by the Yealink manufacturer warranty in Australia; the duration and service conditions were not stated in the supplied DigiPhone record and should be confirmed for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Power compatible standard PoE and PoE+ endpoints.
Pass 10/100/1000 Mbps data to a compatible powered device.
Keep power and data together between the injector and phone.
Use the adapter without software configuration on a compatible connection.
Check power and PoE state from dedicated LEDs.
Use the 100240V input with the correct Australian power cord and installation.
Best for: compatible Yealink conference phones and PoE IP phones connected to network ports that do not already provide PoE.
| DigiPhone SKU | YLPOE30 |
|---|---|
| Product type | PoE adapter / injector |
| PoE standards | IEEE 802.3af and IEEE 802.3at |
| Interface | 10/100/1000 Mbps PoE ports |
| LED indicators | PWR and PoE |
| Input | 100240V AC, 50/60Hz, 1.0A |
| Output | 54V DC, 0.56A |
| Pin definition | 1/2 positive; 3/6 negative |
| Operating temperature | 0°C to 40°C |
| Operating humidity | 10% to 90%, non-condensing |
| Compatibility | Yealink CP960, CP965 and other supported PoE-featured Yealink IP phones |
| Manufacturer warranty | Yealink manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm exact Yealink endpoint, IEEE 802.3af/at requirement, Gigabit cabling, Australian power cord, electrical location and package contents.
| SKU | YLPOE30 |
| Barcode # | 6938818302006 |
| Brand | YEALINK |
| Shipping Weight | 1.0000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
