Build a SIP paging endpoint
Connect a compatible paging destination to an IP PBX for live announcements and supported intercom workflows.
Fanvil PA3 SIP Paging Gateway with 2 SIP Lines, Speaker and Microphone Interfaces
RRP $349.00
14% OFF
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
RRP $349.00
14% OFF
Fanvil • SKU IPF-PA3
A compact SIP paging gateway with two SIP lines, external speaker and microphone interfaces, PoE and USB or TF-card media support.
The Fanvil PA3 is designed for internal paging, public-address and one-touch intercom projects. The supplied record confirms two SIP lines, one speaker interface, one microphone interface, USB or TF-card support and PoE. Fanvil identifies real-time and scheduled MP3 broadcasting among its intended workflows when the external audio, network and SIP design is correctly engineered.
Quick answer: Choose the PA3 as a SIP paging and intercom gateway when a project needs to connect approved external speakers, a microphone and trigger hardware. It is not a complete loudspeaker, amplifier or finished paging system by itself.
Connect a compatible paging destination to an IP PBX for live announcements and supported intercom workflows.
Design the required speaker and microphone arrangement around the gateways supported connections.
Use supported USB or TF-card media for validated MP3 broadcast workflows.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Fanvil PA3 |
|---|---|
| Product type | SIP paging and intercom gateway |
| SIP lines | 2 |
| Audio interfaces | 1 speaker and 1 microphone interface |
| Media | USB or TF card support |
| Power | PoE supported |
It is a SIP paging and intercom gateway for integrating external audio and trigger devices with a compatible IP network.
The supplied DigiPhone record lists two SIP lines.
A complete loudspeaker is not stated as included. The PA3 provides an interface for a compatible external speaker design.
Yes. The supplied record lists one microphone interface.
Fanvil identifies MP3 broadcasting and the supplied record lists USB or TF-card support, subject to configuration and file compatibility.
Yes. The supplied DigiPhone record states PoE support.
No. Speakers, amplification, microphones, cabling, triggers and installation must be scoped separately.
Yes. Provide the SIP platform, zones, speakers, site plan, announcement workflows and required quantity.
Support approved paging and intercom call flows on a compatible platform.
Connect a properly engineered external audio output stage.
Add a compatible microphone for supported intercom or announcement use.
Store approved audio for supported broadcast workflows.
Use compatible network power within the planned switch budget.
Combine SIP, audio and triggers for campus, retail or industrial projects.
Best for: campus paging, retail announcements, transport facilities and industrial SIP intercom projects.
| DigiPhone SKU | IPF-PA3 |
|---|---|
| Product type | SIP paging and intercom gateway |
| SIP lines | 2 |
| Speaker interface | 1 |
| Microphone interface | 1 |
| Media support | USB or TF card, as supplied |
| Broadcasting | Real-time and scheduled MP3 workflows, subject to system design |
| Power | Power over Ethernet supported; confirm local power alternative and package |
| Included items | Gateway only unless confirmed otherwise |
| Manufacturer warranty | Fanvil manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm SIP/PBX, speaker impedance and amplification, microphone, audio levels, zones, media format, triggers, power, cabling and installation.
| SKU | IPF-PA3 |
| Brand | FANVIL |
| Shipping Weight | 0.3999kg |
| type | SMART AUDIO & VISUAL |
This DigiPhone listing is supplied as an Australian version and is covered by Fanvil manufacturer warranty in Australia; the duration and service conditions are subject to Fanvils terms for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Fanvil • SKU IPF-PA3
A compact SIP paging gateway with two SIP lines, external speaker and microphone interfaces, PoE and USB or TF-card media support.
The Fanvil PA3 is designed for internal paging, public-address and one-touch intercom projects. The supplied record confirms two SIP lines, one speaker interface, one microphone interface, USB or TF-card support and PoE. Fanvil identifies real-time and scheduled MP3 broadcasting among its intended workflows when the external audio, network and SIP design is correctly engineered.
Quick answer: Choose the PA3 as a SIP paging and intercom gateway when a project needs to connect approved external speakers, a microphone and trigger hardware. It is not a complete loudspeaker, amplifier or finished paging system by itself.
Connect a compatible paging destination to an IP PBX for live announcements and supported intercom workflows.
Design the required speaker and microphone arrangement around the gateways supported connections.
Use supported USB or TF-card media for validated MP3 broadcast workflows.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Exact model | Fanvil PA3 |
|---|---|
| Product type | SIP paging and intercom gateway |
| SIP lines | 2 |
| Audio interfaces | 1 speaker and 1 microphone interface |
| Media | USB or TF card support |
| Power | PoE supported |
It is a SIP paging and intercom gateway for integrating external audio and trigger devices with a compatible IP network.
The supplied DigiPhone record lists two SIP lines.
A complete loudspeaker is not stated as included. The PA3 provides an interface for a compatible external speaker design.
Yes. The supplied record lists one microphone interface.
Fanvil identifies MP3 broadcasting and the supplied record lists USB or TF-card support, subject to configuration and file compatibility.
Yes. The supplied DigiPhone record states PoE support.
No. Speakers, amplification, microphones, cabling, triggers and installation must be scoped separately.
Yes. Provide the SIP platform, zones, speakers, site plan, announcement workflows and required quantity.
This DigiPhone listing is supplied as an Australian version and is covered by Fanvil manufacturer warranty in Australia; the duration and service conditions are subject to Fanvils terms for this exact product. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Support approved paging and intercom call flows on a compatible platform.
Connect a properly engineered external audio output stage.
Add a compatible microphone for supported intercom or announcement use.
Store approved audio for supported broadcast workflows.
Use compatible network power within the planned switch budget.
Combine SIP, audio and triggers for campus, retail or industrial projects.
Best for: campus paging, retail announcements, transport facilities and industrial SIP intercom projects.
| DigiPhone SKU | IPF-PA3 |
|---|---|
| Product type | SIP paging and intercom gateway |
| SIP lines | 2 |
| Speaker interface | 1 |
| Microphone interface | 1 |
| Media support | USB or TF card, as supplied |
| Broadcasting | Real-time and scheduled MP3 workflows, subject to system design |
| Power | Power over Ethernet supported; confirm local power alternative and package |
| Included items | Gateway only unless confirmed otherwise |
| Manufacturer warranty | Fanvil manufacturer warranty in Australia; duration not supplied |
Compatibility note: Confirm SIP/PBX, speaker impedance and amplification, microphone, audio levels, zones, media format, triggers, power, cabling and installation.
| SKU | IPF-PA3 |
| Brand | FANVIL |
| Shipping Weight | 0.3999kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
