Exact electrical reference
The 12V/1.25A rating gives installers a clear specification to verify.
Yealink 12V 1.25A Australian Power Adapter for T88 IP Phone
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
Yealink • SKU SIPPWR12V1.25A-AU
An Australian 12-volt, 1.25-amp power adapter identified for compatible Yealink T88 IP phones, with a 2.5-metre DC lead reference.
The supplied DigiPhone record identifies SIPPWR12V1.25A-AU as Yealink PSU-12V/1.25A-DC6.5(2.5M), a local power option for a compatible T88 IP phone. Use it only after matching the exact T88 model, connector, polarity and electrical requirements.
Quick answer: Choose this adapter only when 12V/1.25A and the stated Yealink part reference are approved for the exact T88 model. It is a local power accessory, not a universal Yealink supply.
The 12V/1.25A rating gives installers a clear specification to verify.
Provide local power where a supported T88 deployment cannot use network PoE.
Designed for the Australian market according to the supplied record.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| DigiPhone SKU | SIPPWR12V1.25A-AU |
|---|---|
| Yealink part reference | PSU-12V/1.25A-DC6.5(2.5M) |
| Output | 12V DC, 1.25A |
| Lead reference | 2.5 m |
| Stated compatibility | Compatible Yealink T88 IP phone |
| Warranty | 1-year limited manufacturer warranty |
The supplied record states 12V DC at 1.25A.
It is identified for a compatible Yealink T88 IP phone; confirm the exact T88 model before purchase.
The supplied record lists PSU-12V/1.25A-DC6.5(2.5M).
The supplied DigiPhone record states a one-year limited manufacturer warranty.
Yes. The supplied DigiPhone record identifies this as the Australian regional power option; confirm the exact plug and installation requirements before ordering.
No. Match the exact phone or handset model, voltage, current, connector and polarity. Similar-looking adapters are not automatically interchangeable.
Yes. Contact DigiPhone with SKU SIPPWR12V1.25A-AU, the exact Yealink device model and required quantity for compatibility and project support.
Match the exact electrical requirement stated for a supported phone.
Use only with a verified compatible T88 model.
Regional product intended for Australian installations.
Use the supplied Yealink part reference to avoid an incorrect supply.
Support a verified phone where suitable PoE is unavailable.
Keep an approved adapter ready for compatible fleet support.
Best for: verified local-power, replacement and spare requirements for compatible Yealink T88 IP phones.
| DigiPhone SKU | SIPPWR12V1.25A-AU |
|---|---|
| Product type | Australian external power adapter |
| Output voltage | 12V DC |
| Output current | 1.25A |
| Part reference | PSU-12V/1.25A-DC6.5(2.5M) |
| Lead reference | 2.5 m |
| Stated compatibility | Compatible Yealink T88 IP phone; verify exact model |
| Manufacturer warranty | 1-year limited warranty |
Compatibility note: Confirm the exact Yealink device model, voltage, current, connector, polarity and Australian mains-plug requirement before connection.
| SKU | SIPPWR12V1.25A-AU |
| Brand | YEALINK |
| Shipping Weight | 0.5000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.100m |
| Shipping Length | 0.100m |
| type | POWER ADAPTERS |
This DigiPhone listing is supplied as an Australian version and is covered by a one-year Yealink manufacturer warranty in Australia, as stated in the supplied DigiPhone record and subject to Yealinks warranty terms. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU SIPPWR12V1.25A-AU
An Australian 12-volt, 1.25-amp power adapter identified for compatible Yealink T88 IP phones, with a 2.5-metre DC lead reference.
The supplied DigiPhone record identifies SIPPWR12V1.25A-AU as Yealink PSU-12V/1.25A-DC6.5(2.5M), a local power option for a compatible T88 IP phone. Use it only after matching the exact T88 model, connector, polarity and electrical requirements.
Quick answer: Choose this adapter only when 12V/1.25A and the stated Yealink part reference are approved for the exact T88 model. It is a local power accessory, not a universal Yealink supply.
The 12V/1.25A rating gives installers a clear specification to verify.
Provide local power where a supported T88 deployment cannot use network PoE.
Designed for the Australian market according to the supplied record.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| DigiPhone SKU | SIPPWR12V1.25A-AU |
|---|---|
| Yealink part reference | PSU-12V/1.25A-DC6.5(2.5M) |
| Output | 12V DC, 1.25A |
| Lead reference | 2.5 m |
| Stated compatibility | Compatible Yealink T88 IP phone |
| Warranty | 1-year limited manufacturer warranty |
The supplied record states 12V DC at 1.25A.
It is identified for a compatible Yealink T88 IP phone; confirm the exact T88 model before purchase.
The supplied record lists PSU-12V/1.25A-DC6.5(2.5M).
The supplied DigiPhone record states a one-year limited manufacturer warranty.
Yes. The supplied DigiPhone record identifies this as the Australian regional power option; confirm the exact plug and installation requirements before ordering.
No. Match the exact phone or handset model, voltage, current, connector and polarity. Similar-looking adapters are not automatically interchangeable.
Yes. Contact DigiPhone with SKU SIPPWR12V1.25A-AU, the exact Yealink device model and required quantity for compatibility and project support.
This DigiPhone listing is supplied as an Australian version and is covered by a one-year Yealink manufacturer warranty in Australia, as stated in the supplied DigiPhone record and subject to Yealinks warranty terms. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Match the exact electrical requirement stated for a supported phone.
Use only with a verified compatible T88 model.
Regional product intended for Australian installations.
Use the supplied Yealink part reference to avoid an incorrect supply.
Support a verified phone where suitable PoE is unavailable.
Keep an approved adapter ready for compatible fleet support.
Best for: verified local-power, replacement and spare requirements for compatible Yealink T88 IP phones.
| DigiPhone SKU | SIPPWR12V1.25A-AU |
|---|---|
| Product type | Australian external power adapter |
| Output voltage | 12V DC |
| Output current | 1.25A |
| Part reference | PSU-12V/1.25A-DC6.5(2.5M) |
| Lead reference | 2.5 m |
| Stated compatibility | Compatible Yealink T88 IP phone; verify exact model |
| Manufacturer warranty | 1-year limited warranty |
Compatibility note: Confirm the exact Yealink device model, voltage, current, connector, polarity and Australian mains-plug requirement before connection.
| SKU | SIPPWR12V1.25A-AU |
| Brand | YEALINK |
| Shipping Weight | 0.5000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.100m |
| Shipping Length | 0.100m |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
