Add wireless headset freedom
Move away from the desk within the practical Bluetooth range while remaining connected to a compatible phone.
Yealink BT41 Bluetooth 4.1 USB Dongle for Compatible Yealink IP Phones
Not sure what you need?
Read our complete guide.
Not sure what you need?
Read our complete guide.
Yealink • SKU BT41
A compact Bluetooth 4.1 USB adapter that adds compatible wireless-headset connectivity and call control to selected Yealink desk phones.
The Yealink BT41 adds Bluetooth headset support to selected Yealink IP phones through a USB 2.0 port. It supports headset answer, end-call and volume functions on compatible phone, firmware and headset combinations, with an advertised operating distance of up to 10 metres.
Quick answer: Choose BT41 only after confirming the exact Yealink phone model, firmware and Bluetooth headset. It is an accessory for compatible desk phones, not a general-purpose Bluetooth adapter for every phone or computer.
Move away from the desk within the practical Bluetooth range while remaining connected to a compatible phone.
Answer or end calls and adjust volume from compatible Bluetooth headsets and Yealink phone combinations.
Add Bluetooth functionality through the supported phones USB port without replacing the desk phone.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Product type | Bluetooth USB dongle for selected Yealink IP phones |
|---|---|
| Bluetooth | Version 4.1 with backward compatibility |
| Range | Up to 10 metres under stated conditions |
| Interface | USB 2.0 |
| Audio | A2DP; supported narrowband and wideband modes by phone model |
| Call control | Answer, terminate and volume adjustment on compatible combinations |
It adds Bluetooth connectivity to selected Yealink IP phones for use with compatible Bluetooth headsets.
The supplied listing names SIP-T27G, T29G, T46G, T48G, T41S, T42S, T46S and T48S. Yealink also lists selected newer models; confirm the current compatibility list and firmware.
It uses Bluetooth 4.1 and is backward compatible with earlier listed Bluetooth specifications.
Yealink advertises up to 10 metres under suitable conditions; walls, interference and headset design can reduce practical range.
Compatible combinations support answering and ending calls and adjusting volume from the Bluetooth headset.
It is designed and documented as an accessory for compatible Yealink IP phones. Do not assume general-purpose computer support.
Yes. Contact DigiPhone with SKU BT41, the exact phone model, firmware and headset model before purchase.
Add compatible wireless-headset connectivity to selected Yealink phones.
Move around the immediate office area within practical radio conditions.
Use supported answer, end-call and volume functions without reaching for the phone.
Enable compatible Bluetooth audio streaming profiles where supported by the phone.
Install through the phones USB port with minimal desk clutter.
Support a range of listed Yealink models after exact compatibility and firmware are confirmed.
Best for: users adding a compatible Bluetooth headset to a supported Yealink desk phone.
| DigiPhone SKU | BT41 |
|---|---|
| Product type | Bluetooth USB dongle for Yealink IP phones |
| Bluetooth specification | Version 4.1; backward compatible with listed earlier versions |
| Interface | USB 2.0 |
| Operating distance | Up to 10 metres |
| Audio technology | A2DP; 8K NBS and supported 16K WBS by phone model |
| Call control | Answer, terminate and volume adjustment on compatible headsets |
| Frequency | 2.4022.480 GHz |
| Compatibility | Selected Yealink T2, T4 and T5 series phones; verify exact model and firmware |
| Manufacturer warranty | 12-month Yealink limited manufacturer warranty in Australia |
Compatibility note: Confirm the exact Yealink phone, firmware, USB availability, Bluetooth headset profiles and required call-control functions before purchase.
| SKU | BT41 |
| Barcode # | 6938818300774 |
| Brand | YEALINK |
| Shipping Weight | 0.4000kg |
This DigiPhone listing is supplied as an Australian version and is covered by a 12-month Yealink limited manufacturer warranty in Australia. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Yealink • SKU BT41
A compact Bluetooth 4.1 USB adapter that adds compatible wireless-headset connectivity and call control to selected Yealink desk phones.
The Yealink BT41 adds Bluetooth headset support to selected Yealink IP phones through a USB 2.0 port. It supports headset answer, end-call and volume functions on compatible phone, firmware and headset combinations, with an advertised operating distance of up to 10 metres.
Quick answer: Choose BT41 only after confirming the exact Yealink phone model, firmware and Bluetooth headset. It is an accessory for compatible desk phones, not a general-purpose Bluetooth adapter for every phone or computer.
Move away from the desk within the practical Bluetooth range while remaining connected to a compatible phone.
Answer or end calls and adjust volume from compatible Bluetooth headsets and Yealink phone combinations.
Add Bluetooth functionality through the supported phones USB port without replacing the desk phone.
A quick fit check for Australian businesses comparing equipment for users, rooms, sites or wider projects.
| Product type | Bluetooth USB dongle for selected Yealink IP phones |
|---|---|
| Bluetooth | Version 4.1 with backward compatibility |
| Range | Up to 10 metres under stated conditions |
| Interface | USB 2.0 |
| Audio | A2DP; supported narrowband and wideband modes by phone model |
| Call control | Answer, terminate and volume adjustment on compatible combinations |
It adds Bluetooth connectivity to selected Yealink IP phones for use with compatible Bluetooth headsets.
The supplied listing names SIP-T27G, T29G, T46G, T48G, T41S, T42S, T46S and T48S. Yealink also lists selected newer models; confirm the current compatibility list and firmware.
It uses Bluetooth 4.1 and is backward compatible with earlier listed Bluetooth specifications.
Yealink advertises up to 10 metres under suitable conditions; walls, interference and headset design can reduce practical range.
Compatible combinations support answering and ending calls and adjusting volume from the Bluetooth headset.
It is designed and documented as an accessory for compatible Yealink IP phones. Do not assume general-purpose computer support.
Yes. Contact DigiPhone with SKU BT41, the exact phone model, firmware and headset model before purchase.
This DigiPhone listing is supplied as an Australian version and is covered by a 12-month Yealink limited manufacturer warranty in Australia. Warranty service is subject to the manufacturers terms and proof-of-purchase requirements.
Your rights under this warranty are in addition to rights available under the Australian Consumer Law. Keep your DigiPhone invoice and product serial number for any claim.
Bulk and project support: For fleet deployments, spare units or warranty planning, contact DigiPhone with the SKU and required quantity.
Add compatible wireless-headset connectivity to selected Yealink phones.
Move around the immediate office area within practical radio conditions.
Use supported answer, end-call and volume functions without reaching for the phone.
Enable compatible Bluetooth audio streaming profiles where supported by the phone.
Install through the phones USB port with minimal desk clutter.
Support a range of listed Yealink models after exact compatibility and firmware are confirmed.
Best for: users adding a compatible Bluetooth headset to a supported Yealink desk phone.
| DigiPhone SKU | BT41 |
|---|---|
| Product type | Bluetooth USB dongle for Yealink IP phones |
| Bluetooth specification | Version 4.1; backward compatible with listed earlier versions |
| Interface | USB 2.0 |
| Operating distance | Up to 10 metres |
| Audio technology | A2DP; 8K NBS and supported 16K WBS by phone model |
| Call control | Answer, terminate and volume adjustment on compatible headsets |
| Frequency | 2.4022.480 GHz |
| Compatibility | Selected Yealink T2, T4 and T5 series phones; verify exact model and firmware |
| Manufacturer warranty | 12-month Yealink limited manufacturer warranty in Australia |
Compatibility note: Confirm the exact Yealink phone, firmware, USB availability, Bluetooth headset profiles and required call-control functions before purchase.
| SKU | BT41 |
| Barcode # | 6938818300774 |
| Brand | YEALINK |
| Shipping Weight | 0.4000kg |
Copyright © 2026 DiGi Phone.
ABN: 49 168 373 519
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern DiGi Phone’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘DiGi Phone’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is U12 , 35 Redland Drive , VERMONT, VIC, 3133. Our ABN is 49 168 373 519. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.
